Product Bulletin
STAT-MAN
HOME STAT-MAN MANIFOLD KITS MANIFOLDS

STAT-MAN Vacuum Collcctor Manifolds are a new product developed by the Sierra Polymer Company. STAT-MAN is designed for the new Excellon Mark VII drilling machines. STAT-MAN is adaptable to retrofit most Excellon Mark III through Mark VI machines and many other drilling machines.

•   Efficiency - Flow volume is increased with the five 1.062" I.D. inlet ports. Inlet area enlargement of over 60% with STAT-MAN's five 1.062" ports produces significant flow volume improvement.

•   Adaptability - STAT-MAN accepts two inlet hose sizes; .875" O.D. and 1.062" O.D., and two collector hose sizes; 1.75" O.D. and 2.00" I.D. The design of the STAT-MAN manifold makes it a universal upgrade for Excellon and other drilling machines.

•   Conductivity - STAT-MAN, as part of the STAT-MAN SYSTEM, effectively dissipates static electrical charge caused by removal of glass-epoxy chips from the drill heads. ~~ithout an effective method of grounding static charge, the charge either dissipates through the drill bit resulting in damage to the board, or dissipates through the controller damaging sensitive boards.

•   Reliability - STAT-MAN's abrasion resistant, conductive plastic, outlasts stainless steel.

•   Specifications -
Volume Resistivity:  10-7
Surface Resistivity:  150 OHMS/inch
Rockwell Hardness: 83A

PART #  CONFIGURATION INLET PORT OUTLET PORT I.D. OUTLET PORT O.D.
STATMAN5 5 Port Inlet Configuration 1.062" or .875" 1.75" 2.00"
STATMAN4 4 Port Inlet Configuration 1.062" or .875" 1.75" 2.00"
STATMAN3 3 Port Inlet Configuration 1.062" or .875" 1.75" 2.00"
 
Prima PEVM 200 & 300
 
Sierra Polymer also stocks PRIMA PEVM 200 and 300 Series. Both the standard 200 and the low profile 300 series are modified to insure the electrial conductivity of STAT-VAC (.875 O.d> ) conductive vacuum hose.

Distributed By: